Servo, Hitec HS-75BB Retract
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.45sec/60å¡ at no load
Operating Speed (6.0V): 0.34sec/60å¡ at no load
Stall Torque (4.8V): 91.65 oz/in. (6.6kg.cm)
Stall Torque (6.0V): 113.87 oz/in. (8.2kg.cm)
Operating Angle: 170 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 1mA/idle and 150mA no load operating
Current Drain (6.0V): 1.6mA/idle and 180mA no load operating
Dead Band Width: 20usec
Motor Type: 3 Pole Ferrite Motor
Potentiometer Drive: Indirect Switch Drive
Bearing Type: Top Ball Bearing
Gear Type: 1 Metal and 4 POM Resin Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.73" x 0.90"x 0.98" (44 x 23 x 25mm)
Weight: 1.23oz (35g)
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.45sec/60å¡ at no load
Operating Speed (6.0V): 0.34sec/60å¡ at no load
Stall Torque (4.8V): 91.65 oz/in. (6.6kg.cm)
Stall Torque (6.0V): 113.87 oz/in. (8.2kg.cm)
Operating Angle: 170 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 1mA/idle and 150mA no load operating
Current Drain (6.0V): 1.6mA/idle and 180mA no load operating
Dead Band Width: 20usec
Motor Type: 3 Pole Ferrite Motor
Potentiometer Drive: Indirect Switch Drive
Bearing Type: Top Ball Bearing
Gear Type: 1 Metal and 4 POM Resin Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.73" x 0.90"x 0.98" (44 x 23 x 25mm)
Weight: 1.23oz (35g)
